Tung-Sol 6L6G matched pair

€ 107,90
Op voorraad
geen

Tung-Sol 6L6G matched pair

De Tung-Sol 6L6G de eerste beam powertetrode gebruikt in vele gitaarversterkers en in de Quad II monoblokken.
Set of two.

Dit artikel is leverbaar uit voorraad
Voor 16.00 uur besteld dan direct verzonden
Bestellingen vanaf € 50,00 worden gratis verzonden
Alle genoemde prijzen zijn inclusief BTW
Advies nodig? Neem dan gerust contact op.

Meer informatie
Type Buis 6L6
Merk Tung-Sol
Productie Nieuw
Soort Uitgangsbuis
Constructie Beaming Tetrode
Pin Layout Octal 8 pins
Country of Manufacture Russia

Tung-Sol 6L6G matched pair
The 6L6G was the first commercially available beam powertetrode under license developed by RCA in 1936 when the Marconi Valve Corporation qualified developing its own beam tetrode commercially as not feasible. The 6L6 was a great success for RCA and a year later Marconi came with her first beam tetrode the KT66.

Tung-Sol
Tung-Sol Lamp Works was founded in 1907 in Newark, NJ USA. The name Tung-Sol is a contraction of Tungsten or tungsten the element where the filaments in tubes and light bulbs are made and Sol what in Latin means sun. Advertising for Tung-Sol car bulbs Since the 1920s, Tung-Sol also started producing other electronic products, including electron tubes. Tung-Sol strived for perfection of its products by means of a manufacturing process under laboratory standards and strict quality control. The best known tube from Tung-Sol is the 6550 marketed in 1955 in response to the Genalex / Marconi KT88. The 6550 is a so-called 'beam tetrode' and can be found in amplifiers with a lot of power, for example in the Ampeq SVT bass amplifiers and Marshalls 50 and 100 Watt guitar amplifiers for the American market.

In addition to the our premium 6L6G from Tung-Sol, we also sell the 6L6G from Electro Harmonix and TAD

Matched tubes 
This set of tubes is matched. This means that the measured values of the tubes fall within the same range and thus perform equally.
This is important for two reasons:
1. To obtain the same gain factor per tube.
2. For the same amount of quiescent current per tube.
The first requirement speaks for itself and the second requirement prevents the one tube where a higher quiescent current or bias is needed to make it work in the linear region will also be worn out earlier. Both new tubes and our NOS tubes can be ordered separately.